Plunging a toilet

How to Fix the Most Common Plumbing Problems

Everybody hates it when pipes leak in residential properties or commercial buildings. Having an idea of how to fix common plumbing problems is important. The way oxygen is important to the body is the same way good plumbing is important. Try to imagine a scenario where you cannot get clean water for bathing and drinking.

Having clean water is the main reason you need to ensure that you inspect your plumbing systems to check if any part of the system needs repair. However, much plumbing is mostly associated with water services; it also covers furnaces, water boilers, and washing machines. When there is leakage or faulty pipes, the house becomes wet and increases moisture. The excess moisture creates a good environment for mold and fungus to grow, and a clogged toilet or sink will affect your daily life.

Slow Draining Sinks and Bathtubs

A slow draining bathtub and sink are very annoying, in that when you need to keep the bathtub clean, it affects the cleaning process. You can use ways to fix the slow draining sink and bathtub before you ask for professional help. These options are:

  • Use of a plunger

  • Use a mixture of baking soda and vinegar

  • Purchase a commercial clog remover

  • Remove the drain stopper and use a plumber’s snake

You can use these options when you have a sink and bathtub issue. They are the first solutions you need to consider when the sink and bathtub are draining slowly. However, if the problem does not go away, you need to call professionals to handle the situation.

Clogged Garbage Disposal

When you have a clogged garbage disposal, you need to know the important steps of troubleshooting the disposal. There are a few steps that you may need to follow to solve the clogging problem:

  1. Ensure that you have turned off the breaker that controls the garbage disposal to avoid accidents when fixing it.

  2. When the break has been turned off, find a flashlight and check if you can see what has clogged the garbage disposal. If you can see the material that has blocked the disposal, use a long-handled tong to remove it. After removing the material that has clogged the disposal, you can turn the power on and test if it works.

  3. There is a possibility of broken-down food particles lumping up together when they are not broken down properly. To solve this problem, turn off the breaker and run water into the garbage disposal. When the water has covered the disposal, use a plunger to pump the drainage; the blockage has been removed if the water drains.

  4. As we discussed above, you can use a mixture of baking soda and white vinegar to help unclog the drain.

Dripping Faucets

A dripping faucet is whereby water drips from the faucet; the amount of water lost by the dripping increases the amount of money you pay on your water bills. The slow drip of water can create water damage if the sink fills up. On the other hand, the constant sound of water hitting the sink is equally annoying.

When you have a dripping faucet, you need to know how to fix it. Faucets have an inner stem that controls the flow of water. These stems have seals or rubber washers that close and open to control the water flow. To fix the dripping faucet issue, you need to replace the washers in the faucet.

No Hot Water

When you do not get hot water in your taps, that shows that the water heater is not getting power or may have tripped. First, check if the water heater circuit breaker has tripped if it has tripped, turn it back on, and the heater will work.

If the circuit breaker did not trip, reset the high-temperature limit of the heater. To reset the high temperature, use the following steps:

  1. Turn off the water heater circuit breaker

  2. Remove the access panel that covers the heating element.

  3. Remove the plastic guard, and the insulation does not touch any of the exposed wires.

  4. Press the high-temperature cutoff reset button; it is red and is located above the thermostat.

  5. Cover everything as they were initially

  6. Turn on the power

If none of the above solves the problem, we recommend hiring a professional to help you.

Running Toilet

The operating mechanism of toilets has remained the same for many years. The mechanism has a float lifted when water fills the tank after flushing. The float rises to a certain level then shuts off. Check if all the mechanisms are working properly and adjust the tank water level to avoid water overflow.

Hard Water

Hard water contains minerals, magnesium, chloride, and calcium; this makes cleaning very difficult in that it requires a lot of soap when cleaning. Another problem is that it leaves water spots on cleaned items. To get rid of hard water, you need to install a soft water filter to ensure that all the water in the house is soft.

You need to ensure that you can troubleshoot minor plumbing issues. However, you need to call professionals like Yochum Plumbing Services. The plumbing experts will ensure that you sit back and relax while all your plumbing problems are sorted.